GNSS

E200

E200 GNSS Receiver offers advanced technology, a durable design, and multiple features, making it the top choice for a rover station receiver to enhance productivity in the field.

Integrated RX Radio

The E200 is equipped with a built-in Global 4G Network and RX radio module, enabling it to function seamlessly as a rover station.

Max 60° Tilt Survey

Say goodbye to the hassle of leveling and instead focus on precisely pinpointing where the pole tip needs to go, even in hard-to-reach areas like building corners and slopes. Plus, with the stability of the stationary pole tip, you can confidently measure without any concern about pole movement.

RTK AID FUNCTION

The RTK Aid function is a powerful feature that allows users to continue working uninterrupted even when RTK (Real-Time Kinematic) corrections fail. RTK correction refers to the process of correcting errors in GPS measurements caused by several factors such as atmospheric disturbances, satellite orbits, and signal reflections.

 
Tech specs

Specifications

Scroll through this section to discover the product features.

Satellites tracking

  • GPS: L1CA, L2P(Y), L2C, L5
  • BDS: B1I, B2I, B3I, B1C, B2a, B2b
  • GLONASS: L1, L2
  • GALILEO: E1, E5a, E5b, E6
  • QZSS: L1, L2, L5, L6
  • SBAS: WAAS, GAGAN, MSAS, EGNOS, SDCM, BDS
  • L-Band: B2b PPP (Only for the Asian-Pacific region)

Channels: 1408

Cold start: < 30 seconds

Warm start: < 20 seconds

Hot start: < 5 seconds

RTK signal initialization: < 5 seconds

Initialization reliability: > 99.9%

Update rate: 20 Hz

High precision static: H: 2.5 mm + 0.1 ppm RMS V: 3.5 mm + 0.4 ppm RMS

Static and Fast Static: H: 3 mm + 0.5 ppm RMS V: 5 mm + 0.5 ppm RMS

RTK: H: 5 mm + 0.5 ppm RMS V: 10 mm+0.5 ppm RMS

Standard point positioning: H: 1.5 m RMS V: 2.5 m RMS

Code differential: H: 0.4 m RMS V: 0.8 m RMS

SBAS: H: 0.3 m RMS V: 0.6 m RMS

Correction data: RTCM V3.X, RTCM2, CMR

Data output: GGA, ZDA, GSA, GSV, GST, VTG, RMC, GLL, Binary

  • Battery: Rechargeable, Built-in Lithium-ion battery x 1, 7.2V ~ 6900 mAh
  • Voltage: 9 – 28V dc
  • Working time: Up to 9 hours
  • Charging time: Typically 4 hours
  • Supported band: Global 4G

    • LTE FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28
    • LTE TDD: B38, B39, B40, B41
    • UMTS: B1, B2, B4, B5, B6, B8, B19
    • GSM: B2, B3, B5, B8
  • Operation system: Linux
  • Internal memory: 8 GB
  • Bluetooth: BT5.0+EDR, BLE
  • Wi-Fi: 802.11 a/b/g/n/ac
  • SIM card: supports
  • TNC: connect internal radio with antenna
  • 5-pin port: Connect to external radio and external power; NMEA output
  • Type-C port: Charge and data transmission
  • Web UI: View status, update firmware, set up working mode, download data, etc.
  • Intelligent voice: Broadcast working mode and status
  • MEMS: Fast initialization, dynamic tilt survey up to 60°
  • Dimension: Φ152 mm x H92 mm 
  • Weight: 945 g
  • Operating temperature: -30℃ – +65℃
  • Storage temperature: -40℃ – +80℃
  • Water-/Dust proof: IP67
  • Shock: Withstand topple over from a 2 m survey pole onto hard surfaces; Survive a 1.2 m free drop
  • Vibration: Vibration resistant
  • Humidity: Up to 100% 
  • Indicators: Satellites, datalink, battery, Bluetooth
  • Button: Power button, short press to voice broadcast working mode and status
  • Certificate: CE, FCC, NGS, IGS

E200 Product Datasheet (PDF)

Check out our store